Introduction: The “One-Shot” Process
ในการผลิตอุปกรณ์อิเล็กทรอนิกส์ Hot-Press Welding (Hot-Bar Soldering) is often used to connect wire harnesses to PCBs. It’s a fast, efficient process—but it has a catch. Once the solder cools and solidifies, reworking the joint is incredibly difficult and risky. Applying heat again can damage the delicate FPC (Flexible Printed Circuit) or the wire insulation.
Because rework is so dangerous, the goal is to get it right the first time—or at least catch the failure immediately before the part moves downstream. Relying on human operators to squint at tiny solder joints under a microscope is slow and inconsistent. It leads to missed “cold joints” or “bridging” that cause short circuits in the final product.
The Challenge: Tiny Wires, Big Risks
The project goal was to implement an inline visual inspection system that provides closed-loop quality control.
The Defect Spectrum:
The system needed to reliably identify a complex mix of both soldering and assembly errors:
- Solder Integrity: Detecting cold joints, insufficient solder, false (dry) soldering, solder balls, and excess solder.
- ความปลอดภัยด้านไฟฟ้า: Catching solder bridging (shorts).
- Assembly Logic: Flagging physical misalignments, crucially, Wire-Sequence Errors (wrong color order), which a simple electrical test might miss until it’s too late.
Hot-press welding connects fine wires to the PCB; defects like bridging or cold joints must be caught instantly.
The Solution: A Fully Automated Line
UnitX deployed a comprehensive Wire-Harness Inspection Line that automates the entire checking process.
UnitX’s automated line integrates barcode scanning, precision positioning, and AI vision stations.
ผังกระบวนการ:
- ตรวจสอบย้อนกลับ:Integrated barcode scanning logs and tracks each unit to ensure complete production traceability..
- Multi-Station AI Vision: พร้อมกับ UnitX OptiX vision system inspect the joints from optimal angles.
- Instant NG Sorting:: Defective units are automatically picked up and moved to a reject station, preventing them from reaching the reflow conveyor.
Results: Fast, Accurate, and Labor-Efficient
โดยการนำ UnitX’s automated inspection solution, the customer achieved an immediate, measurable impact across their SMT production line.
-
Fast Throughput: ดำเนินการด้วย Cycle Time = 1.1 s, easily keeping pace with high-volume manufacturing demands.
-
Maximum Agility: Engineered with robust support for rapid deployment and quick model changeovers, keeping overall Down Time ≤ 1.5%.
-
ความแม่นยำสูง: บรรลุความสำเร็จ False Acceptance Rate ≤ 0.05% และ False Rejection Rate ≤ 0.5%, ensuring critical defects are caught without sacrificing perfectly good parts.
-
ประหยัดค่าแรงได้อย่างมหาศาล: โดยการนำ UnitX’s solution, the customer easily saves 4 operators per line, recovering over 20 ชั่วโมงแรงงาน in total every single day.
Defect Visualization
The images below demonstrate the UnitX AI solution to see detailed soldering flaws. Note the clear identification of “Solder Bridging” (a short circuit risk) and “Wire-Sequence Error” (assembly mistake).
UnitX AI detects critical soldering faults and assembly errors that are difficult to spot manually.
สรุป
In SMT and wire harness assembly, the cost of a defect increases exponentially the further it gets down the line. UnitX’s Hot-Press Welding Inspection solution acts as the ultimate firewall. With 4 operators saved per line และ 1-second cycle time, it turns a risky “one-shot” process into a controlled, reliable operation.
Stop risking rework on hot-press welds.
ติดต่อเรา UnitX to automate your soldering inspection.
